Posted on

MATERONTEK PRESSURE TX’S

Series: EPT1000

Sensing and Internet of Things

OEM Pressure Transmitter
Stainless steel pressure sensor
Mass production, automated calibration

Features:

  • Measuring ranges from 200mbar to 100bar
  • Gauge pressure
  • Accuracy: ±0.5%FSO(Typ.)
  • Calibrated and temperature compensated
  • Stainless steel pressure sensor
  • Output 4…20mA, DC1…5V, DC 0.5…4.5V

Application:

  • Hydraulic and pneumatic
  • Machine building
  • Pumps
  • Water treatment
  • IoT pressure measurement

Technical data:

Pressure range:

Nominal pressure [bar]: 0.2, 0.35, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16, 20, 25, 35, 50, 70, 100 (Standard Ranges – others available on request, in Vacuum, and Compound Ranges)
Overpressure [bar]: 0.4, 0.5, 1, 1.5, 3, 5, 7, 10, 15, 30, 40, 50, 70, 100, 140

Performance:

  • Accuracy* 0.5 %FS@25°C *Linearity (best straight line) +
  • Hysteresis + Repeatability
  • Operating Temperature -20 to 85°C
  • Compensated Temperature Range -10 to 70°C
  • Vibration 20 g RMS(20 to 2000Hz)
  • Shock 100 g(10ms)
  • Cycles 10×105
  • Long Term Stability 0.2 %FS
  • Electrical @25°C

Output signal / Supply:

  • 2-wire 4…20mA / VS = 9… 30VDC
  • 3-wire 1…5VDC / VS = 9… 30VDC
  • 3-wire 0.5…4.5VDC / VS = 9… 30VDC
  • Insulation Resistance 100 MΩ@100VDC
  • EMC Test IEC61000-6-2/IEC61000-6-3
  • Reverse polarity protection No damage – no function

Physical Specifications:

  • Housing 304 stainless steel
  • Diaphragm 316L stainless steel
  • Oil Filling Silicone oil
  • Protection IP65
  • Weight ~200g

Connections:

  • E1 – DIN175301-803A/DIN43650/IP65
  • E2 – DIN175301-803A with Circular connector, M12x1(4-pin)/IP65
  • E3 – Circular connector M12x1(4-pin)/IP65

Datasheet- Pressure Transmitter-EPT1000-E

 

Accessories:     Intelligent LED digital display:   Model DP-4

  

Features:
– 2-wire LED display
– No external power supply required
– The minimum operating current: 3mA
– Four-digit LED, display resolution 1/9999
– Display physical amount: pressure, temperature, flow etc.
– Standard DIN43650 electrical connection

 

Datasheet-Intelligent LED digital display-DP-4 -EN

 

 

 

 

 

Posted on

MATERONTEK – SUBMERSIBLE LEVEL TX’S

LT1000 submersible Series:

Sensing and Internet of Things

Submersible Level Transmitter
Stainless steel sensor
Mass production, automated calibration
Sensing and Internet of Things

The LT1000 submersible level transmitter has been designed for level measurement in contact
With the medium in harsh operating conditions. It offers an accuracy of 0.5 %FS and with an
ingress protection of IP 68, is suitable for permanent level measurements up to 100 m water column.

Features:

  • Measuring ranges from 2mH2O to 120 mH2O
  • IP68, Submersible level measurement
  • Low-cost, simple level measurement
  • Accuracy: ±0.5%FSO(Typ.)
  • Calibrated and temperature compensated
  • Stainless steel pressure sensor
  • Output 4…20mA, DC1…5V, DC 0.5…4.5V, MODBUS RTU

Application:

  • Drinking water systems
  • Ground water monitoring
  • Domestic water tanks
  • Rain spillway basin

Technical data

Measuring range:

Nominal pressure [mH2O] 2, 4, 5, 8, 10, 12, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120
Overpressure [mH2O] 3, 6, 7, 12, 15, 20, 30, 35, 40, 50, 60, 70, 100, 110, 130

Performance:

  • Accuracy* 0.5 %FS@25°C *Linearity (best straight line) + Hysteresis + Repeatability
  • Operating Temperature -10 to 50°C
  • Compensated Temperature Range -10 to 50°C
  • Vibration 20 g RMS(20 to 2000Hz)
  • Shock 100 g(10ms)
  • Cycles 10×105
  • Long Term Stability 0.2 %FS
  • Electrical @25°C

Output signal:

  • 2-wire 4…20mA / VS = 9… 30VDC
  • 2-wire HART+4…20mA / VS = 12… 30VDC
  • 3-wire 0.5…4.5VDC / VS = 9… 30VDC
  • 3-wire 0.5…4.5VDC / VS = 5VDC
  • 4-wire I2C / VS = 3.3…5VDC
  • 4-wire MODBUS RTU / VS = 9…30VDC
  • Insulation Resistance 100 MΩ@100VDC
  • EMC Test IEC61000-6-2/IEC61000-6-3
  • Reverse polarity protection No damage – no function

Physical Specifications:

  • Housing 316 stainless steel
  • Diaphragm 316L stainless steel
  • Protection cap Stainless steel, POM-C
  • Cable sheath PUR, PE, PTFE
  • Oil Filling Silicone oil
  • Protection IP68
  • Weight ~250g (without cable)

Dimensions: (All dimensions in mm)

datasheet-level-transmitter-lt1000-enDownload

 

 

 

 

Posted on Leave a comment

Sensit P6420-57/61Abrasive Material Pressure Transmitter

Sensit P6420-57 Abrasive Material Pressure TransmitterThe Sensit P6420-57/61 is a pressure transducer having a two wire, 4-20mA output. It is available in standard ranges from 5 bar to 50 bar, or may be scaled to customer requirements.

Description:

The P6420-57/61 pressure transducer is based on a four active arm strain gauge bridge fused to a high purity ceramic diaphragm, offering high natural output coupled with superb chemical and corrosion resistance. It has been designed primarily for use with concrete slurry and other abrasive fluids and has a cavity free, flush sensing diaphragm covered by a flexible polypropylene shield.

Sensit P6420-61It offers a two wire, 4-20mA output proportional to fluid pressure with other outputs available as options. The sensing element and its associated electronics are housed in a rugged stainless steel case.

Features:

  • Superb chemical and corrosion resistance
  • 4-20mA, two wire operation (option 5-21mA)
  • Unrivalled abrasion resistance
  • Wide temperature range
  • High electrical isolation
  • Rugged construction
  • Excellent long term stability

Applications:

  • Concrete pumping & other abrasive applications
  • Gypsum
  • Brick dust
  • Clay

Download P6420-57 Data Sheet

Download P6420-61 Data Sheet

 

Posted on

Clark Sonic – EchoPod Ultrasaonic Level Tx.

EchoPod® Ultrasonic Level Switch/Transmitter/Controller. Loop Powered 4-20 mA Output, Range To 49.2″ (1.25 m).

Description:

EchoPod is an innovative level sensor that replaces floats, conductance and pressure sensors that fail due to dirty. sticking and scaling media in small tanks 49.2″ (1.25m) or less. EchoPod, a general purpose sensor. combines non-contact switch, controller and transmitter capabilities in one package. Combining 4 relays, 4-20mA output and pump/valve control in one small sensor allows EchoPod to be a solution. Maintenance free, EchoPod reduces tank system hardware through simplicity and consolidation. Additionally. EchoPod is well suited for corrosive and dirty applications with its non-metallic housing and transducer. EchoPod provides a total solution for fluid handling and automation.

The rugged PVDF enclosure is well suited for a wide range of corrosive, waste or slurry type media, and can be broadly selected for atmospheric day tank, process vessel or dispenser, pump lift station and waste sump applications. Level indication can be monitored via a local display or controlled through a PLC.

Features:

Provides switch, controller and transmitter capabilities
Replacement of multi-point float, conductivity and pressure level switches
WebCaI™, an innovative PC user interface that provides fast and accurate configuration
Compact sensor with 2″ dead band and beam width optimized for small tank applications
49.2″ (1.25m) or less

Specifications:

Range: 49.2″ (1.25 m)
Accuracy: 0.125″ (3mm)
Resolution: 0.019″ (0.5 mm)
Beam Width: 2″ (5 cm)
Dead Band: 2″ (5 cm)
Supply Voltage: 24VDC (loop)
Loop Resistance: 400 Ohm Max.
Consumption: 35 mA Maximum
Signal Output: 4-20 mA (When loop powered)
Contact Type: (4) SPST, 1A relays
Loop Fail Safety: 4 mA, 20 mA, 21 mA, 22 mA or hold last
Relay Fail Safety:
Power Loss: Hold Last
Power On: Open, close or hold last
Hysteresis: Selectable
Configuration: WebCal® Windows® software interface
Temperature Compensation: Automatic over range
Operating Temperature: 20 to 140°F (-7 to 60°C)
Operating Pressure: Atmospheric
Enclosure: NEMA 4X, encapsulated, corrosive resistant & submersible
Enclosure Material: PC/ABS FR
Strain Relief: Santoprene
Transducer Material: PVDF
Cable Length: 48″ (1.2 m)
Cable Jacket Material: Polyurethane
Process Mount: 1″ NPT or 1″ G

Calibration:

Simple software configuration through WebCal™, using USB connectivity enables flexible system integration or retrofit for suitable applications. WebCal’s user interface makes configuration quick and simple for even novice computer users. By entering your application requirements through pre-programmed menus, WebCal will accurately configure EchoPod to your application requirements every time. Additionally, WebCal provides a printed wiring schematic management system that saves your configuration for backup, technical assistance or additional applications.

EchoSpan & EchoPod Literature 

Learn More