EchoPod is an innovative level sensor that replaces floats, conductance and pressure sensors that fail due to dirty. sticking and scaling media in small tanks 49.2″ (1.25m) or less. EchoPod, a general purpose sensor. combines non-contact switch, controller and transmitter capabilities in one package. Combining 4 relays, 4-20mA output and pump/valve control in one small sensor allows EchoPod to be a solution. Maintenance free, EchoPod reduces tank system hardware through simplicity and consolidation. Additionally. EchoPod is well suited for corrosive and dirty applications with its non-metallic housing and transducer. EchoPod provides a total solution for fluid handling and automation.
The rugged PVDF enclosure is well suited for a wide range of corrosive, waste or slurry type media, and can be broadly selected for atmospheric day tank, process vessel or dispenser, pump lift station and waste sump applications. Level indication can be monitored via a local display or controlled through a PLC.
Provides switch, controller and transmitter capabilities
Replacement of multi-point float, conductivity and pressure level switches
WebCaI™, an innovative PC user interface that provides fast and accurate configuration
Compact sensor with 2″ dead band and beam width optimized for small tank applications
49.2″ (1.25m) or less
Range: 49.2″ (1.25 m)
Accuracy: 0.125″ (3mm)
Resolution: 0.019″ (0.5 mm)
Beam Width: 2″ (5 cm)
Dead Band: 2″ (5 cm)
Supply Voltage: 24VDC (loop)
Loop Resistance: 400 Ohm Max.
Consumption: 35 mA Maximum
Signal Output: 4-20 mA (When loop powered)
Contact Type: (4) SPST, 1A relays
Loop Fail Safety: 4 mA, 20 mA, 21 mA, 22 mA or hold last
Relay Fail Safety:
Power Loss: Hold Last
Power On: Open, close or hold last
Configuration: WebCal® Windows® software interface
Temperature Compensation: Automatic over range
Operating Temperature: 20 to 140°F (-7 to 60°C)
Operating Pressure: Atmospheric
Enclosure: NEMA 4X, encapsulated, corrosive resistant & submersible
Enclosure Material: PC/ABS FR
Strain Relief: Santoprene
Transducer Material: PVDF
Cable Length: 48″ (1.2 m)
Cable Jacket Material: Polyurethane
Process Mount: 1″ NPT or 1″ G
Simple software configuration through WebCal™, using USB connectivity enables flexible system integration or retrofit for suitable applications. WebCal’s user interface makes configuration quick and simple for even novice computer users. By entering your application requirements through pre-programmed menus, WebCal will accurately configure EchoPod to your application requirements every time. Additionally, WebCal provides a printed wiring schematic management system that saves your configuration for backup, technical assistance or additional applications.