CARBON MONOXIDE (CO) DETECTORS
CMD Series: Precision gas control/sensing. Peace of mind through reliable gas monitoring. The CO Detector sense and transmit to any compatible electronic analog control, DDC/PLC controller or automation system for the control of ventilation equipment.
The CO Detector features electrochemical sensing elements with a menu driven setup/calibration. It is powered by either AC or DC source with no change to circuit required. A choice of three field adjustable analog output signals, linearized over full range is available.
FEATURES:
- Surface or Duct mount models
- Long-life, replaceable electrochemical sensor
- Optional LCD display
- Optional relay outputs & audible alarm
- Superior Electrochemical sensing elements
- Set up/calibration fully menu driven (requires LCD option)
- 0-300 PPM standard (5%), other ranges available
- 0-500 PPM for (3%)
- Optional on board relays with field adjustable trip point.
- Optional LCD for displaying PPM level and menu options.
- Powered by either AC or DC source with no change to circuit required.
- Choice of three field adjustable analog output signals, linearized over full range.
- Modbus communications option.
- Field replaceable calibrated sensor module.
CO DETECTOR:
Environmental, industrial and commercial indoor Carbon Monoxide (CO ) gas detector. Available in both a space and duct mount version.
APPLICATION:
To sense and transmit carbon monoxide levels to any compatible electronic analog control, DDC/PLC controller or automation system for the control of ventilation equipment. Typical usage in underground Car Parks.
