NorthStar Accessories:
- Performs up to 18 tests of signal output quality; simple one keystroke access to tests
- Interfaces with most major brands of digital tachometers and encoders
- Fast encoder checkout with numeric value display
- Accepts A, B, and Z inputs from two separate encoders
- Eliminates the need for two input devices
- Status indicators for normal operation and encoder selection
- Thermal, under voltage, reverse polarity, and overload protection
- Input voltage range from 4 to 26 VDC
- Provides redundancy and backup
- Eliminates the need for two encoders
- Routes signals to multiple locations, repeats and amplifies
- Provides two independent, isolated 5-26 VDC line driver outputs
- Compatible with virtually all incremental encoders
Dynapar Accessories:
- Speed Range: typically 50 RPM min. to 4000 RPM max.
- Sine wave output
- Passive, no external power source required
- Compact 3/8″ & 5/8″ diameter packages
- Rugged, mill-duty construction
- Low Cost Pickup
- Compact Design
- Simple Installation
- Wide Operating Range
- High output gear tooth sensor
- Requires no power Supply
- For low RPM measurement
- Kits include mounting plate and hardware
- Makes servo mount 2.5″ or 60A encoders interchangeable with 5PY DC tach generators.
- Suitable for all dynapar 2.5″: encoders
- Maximum mechanical, thermal, and electrical protection for encoder shaft connections
- Three-beam helical design restricts torque “windup”
- Clamp attachment. No setscrews to score or pit shafts
- Full range of models designed to match specific encoders are supplied with shaft size adaptors
- Kits include mounting plate and hardware
- Makes servo X25 encoders interchangeable with 5PY DC Tacho generators.
- Suitable for Dynapar Explosion Proof X25 Encoder
- Mating Connectors with Cable Clamps
- Shielded Cable without Connector
- Cable Assemblies
- M12 & M8 Straight or 90deg
- Field Wirable
- Mil spec-Plugs & Sockets-6,7 or 10 pin standard
FV2 Brushless Digital Feedback
- Bidirectional Frequency/Voltage or Frequency/Current Converter
- An FV2 and an encoder replace a DC Tachometer when precision feedback is required.
FV3 Frequency to Voltage Converter
- Delivers 0 to +10 VDC or 4-20 mA outputs proportional to input pulse rate (frequency).
- Accepts variable pulse rate inputs from a variety of sensors.
- Linearity ±0.2% maximum.
- An FV3 and an encoder replace a DC Tachometer when precision feedback is required.
- Precision machined aluminum (6061-T6)
- Drilled and tapped where required
- Mounting hardware included
- Encoder can be mounted from either side
- Allows servo ring mount for phasing adjust
- Fit most Dynapar brand Encoders
- Rubber, Phenolic and O-Ring Surfaces, Knurled
- Fast, Easy Attachment
- Typical stock-300mm, 500mm, 1Ft, 1/3Meter
- Various Bore sizes in Imperial and Metric
- “Flowerpot”style adapter kit
- Provides spacer, coupling and all necessary hardware
- 5/8″I.D.couplingfor56Cmotorshaftswith extensions from 1.1″ to 1.8″ long
- Dual universal input amplifier
- Provides 6 types of input functions
- 240vac or 115vac supply
- Surface mount robust Aluminum housing
- Complete Pre-assembled Mounting System with Hardware Included
- Single or Dual Wheel uses Same Mount
- Easy Machine Attachment
- Built-in Spring Tension for Accurate Tracking
- Complete mounting system with hardware included
- Single or dual wheel uses same mount
- Easy machine attachment
- Accepts Series 21/22 Qube Encoders
- Complete, pre-assembled mounting system with hardware included
- Single or dual wheel uses same mount
- Easy machine attachment
- Built-in spring tension with two degrees of freedom for accurate tracking
